Friday, 12 December 2014

Pots

No! Not Miss Pots, palm pots!

Actual Palms were made by me but in Speedtree. Foliage is usually very time consuming, and it definitely wasn't the main focus in our scene, so we decided to take advantage of speedtree.

On second texture version I decided to add some water leaks, like someone was here just a while ago and watered the plants, I thought it would be nice to have that.



Vases


Really love how this asset came out. Even though it's nothing special, it's a really nice touch to a scene.
Process was the same as before. Zbrush->Coat->Substance


Second version of vase texture was a little break through in understanding of how PBR works in UE4. Thanks to this asset I was able to easily fix all metal bits on my character. I experimented a bit with roughness and metalness, tried to find out why is it sparkling. Reason for that was too high roughness, metalness had nothing to do with it. In fact, I found that any material with roughness to high will start sparkling, even if non metal. So optimal settings in Substance for metal was between 3,5 and 4,5. That way texture would look right in UE4, still had to multiply roughness map by 1,5 like with all other assets.

Fountain


This was quite straight forward. I used base mesh provided by Chris, made a sculpt ->retopology->UVs->bake-> texturing.

That long pillar wasn't really working in our scene, so I decided to get rid of it, and eventually, it looked better. As you can see, normals are quite simple here.


Intention was to make fountain look wet from the inside, also added some water leaks on the outer edge.

Monday, 8 December 2014

Dove

I really enjoyed working on this one, even though it was really fast.


Dove's body is pretty simple, to simulate feather like texture I just used clay build brush. For wings and tail, I first made few versions of feathers and then just duplicated them across.
Retopology and UVs in 3D-coat, textures in Substance.

Sunday, 7 December 2014

Floor tiles.


By the time character and dagger were finished, Chris done all the large assets in our scene.  So basically our scene was set, now it was time to fill it and finalize the textures. From the very beginning we agreed that when I will finish the character, Chris should have base of the level done. And after that we switch, I start to work on the environment from there, and he start rigging, skinning and animating.


All you see on this screen above was made by Chris. He also made Towers and  the big Dome that are not in this shot. Floor and the fountain however were just block outs, we agreed from the beginning that I will work on the floor tiles and fountain. So I started with the floor.
All tiles were first sculpted in Zbrush. I like to work that way over using something like nDO. Some may say that it is faster to do something like that in nDO, but I don't really agree. At this point I feel pretty confident with Zbrush, and what I think is also important, I love this software. Process is very fast. Sometimes I just use masks, sometimes I make alphas in Photoshop. You may ask, well what the point in Zbrush then, if you are still making alphas in Photoshop, just go straight to nDO. Even though I got alphas, the ways I can use them offered by Zbrush, make the difference for me. Sometimes just by using different types of symmetry it is possible to come up with new cool patterns.


Same as before, Normal,Curvature and Ambient maps were baked in Substance Designer. Curvature and Ambient maps were not used as overlay or multiply layers, the were required to make Painter effects work.
Texturing been done in Painter, it allowed me to make many adjustments, and make them quickly.




Dagger


Model for Dagger was made right after character was done, I had to make sure Chris got all the models he need to start animating. Process for making this asses was same as for character.
Sculpt in Zbrush, topology and UVs in 3D-Coat, baking in S.Designer, textures in S.Painter.

Design was mostly influenced by one of the photos from my Moorish moodboard, with slight changes.


Even though model was done right after character, Dagger was almost the last asset to be textured. There were so many thing to make first. I decided to go on less exiting assets first because I wanted to leave some dessert for later. I really wanted to texture the dagger, and there was no maybe, I had to texture it. I really like how it came out. By the end of the project I had a good grasp of how to texture in Painter and what need to be done to make it look right in UE4.

Wednesday, 3 December 2014

Character development


When concept was done I went straight to Zbrush.
For base i used male body that I previously sculpted. I adjusted the proportions to stay closer to the concept I've made. 
I always begin with quick sketch in Zbrush, making sure to establish bigger shapes first, without going much into the details. It wasn't too hard with this character, as I already had my design, I only needed to transfer it to 3D.

When this stage was done and proportions of the character were set to permanent, I gave the decimated version of sculpt to Chris. He used it to scale Unreal Man to proportions of our character, so he could start making animations while I am still working on character.



At this point all big shapes were set and I was ready to show character to Jamie. 
Feedback was really helpful, he pointed out few things about the face and said that I need to do some work on the pants. He suggested adding more changes of planes and sharp and soft edge variety. He also pointed out that it is good to use more reference for that.


I gathered some reference that I thought could be useful and then worked on all the areas Jamie pointed out. The main problem was that I wanted to keep pants symmetrical to save some resolution. Whole design is quite symmetrical, but I tried to play it smart, and broke symmetry with glove guard on left hand and asymmetrical scarf.






When this sculpt was approved I went into sculpting all the details. I tried to stick to concept art, but some things still were changed to add more realism. Main changes were on his hairstyle,boots and arms. We decided to go with bare arms, because environment is quite hot and such warm clothes didn't really fit. 


Next step was to set up base colours. Just a block out, somewhat a plan for texturing. No more vertex colour baking with PBR, workflow changed a lot. I used vertex colour baking only to create material ID masks, and they looked like this -


I used flat colours with max saturation. I can't describe how much time been saved thanks to this map. 

For Retopology and UVing I used amazing software called 3D-Coat. It is very fast and intuitive.
To learn how to properly do topology for character I bought tutorial by Hai Phan at CGCircuit.com.
It was extremely useful. I learned about correct flow, about how to set correct loops for places that going to deform a lot e.g. knees and elbows. Topology on the face is animation friendly too. At some point I felt like retopology took me longer than high poly. I would lie if I say that I liked doing it, but I certainly did my best and put a lot of effort in it. It wasn't just some personal project, I was working with animator, and had to make sure that what I produce is good. Apparently I succeeded in it. Chris mentioned many times how much he liked topology on the character, and how easy it was to use this model. I can't even say how happy I was to hear that, as I was worried a lot if it's going to work.
I also need to mention that I made really major mistake in the beginning. I modeled hands too low down, so armpit was merging a bit with the arm, and it was really bad for animation. During sculpting I had this feeling, but as I been showing the sculpt to others, and no one ever mentioned it, I thought ( or hoped) it should work. I realized that it's a terrible mistake only when I Retopologized, UVed! and baked normal maps. So I had to go back, move hands higher, resculpt armpits, make new topology (thankfully I was able to reuse hand, so I saved some times on not making new topology for fingers), then make new UVs and rebake. You can see that on the image below arms are higher than on last Zbrush sculpt (coloured one).



Normal maps for character and pretty much everything else were baked in Substance Designer. I was amazed how clean bakes were. It maybe because of me being more experienced now with how to bake normals properly. How to set objects, and how to arrange smoothing groups. I learned a lot from my classmate Alex Downham. But even though, bakes from SD were extremely clean, and in most time I didn't even need cage mesh. Baking was really fast thanks to Designer ability to turn on and off meshes for baking. On the right you see quick import test that I've done to see how well UE4 handles seams. Result was absolutely great, that set me free to start texturing.


Texturing was totally new and unusual experience. In my opinion Substance Painter is as revolutionary software for game industry as was Zbrush when it arrived. Texturing feels so natural now, it made transition to PBR a bit easier. In some kind S.Painter reaminds of Photoshop in its structure. I know all the tricks with masking in Photoshop quite good, so I got grip of workflow in Painter pretty fast. Masks on layers, masks on groups, groups withing groups and mask on those groups. All that allowed to utilize custom Substance effects and freely edit them afterwards by adding our subtracting from them. At the moment Painter is missing some minor things, but it is already a very powerful software.




When character got imported into UE4 first, there was a huge issue with roughness and everything that was metal. Everything looked almost as twice shiny as in Substance, and metals were freaking out and sparkling all over the place. Skin looked like it's covered in oil. Nobody is 100% sure at the moment, but say that this difference in roughness is because of lighting types.
Solution for this was to multiply roughness map in Engine by 1.5. Interesting fact, is that another artist who was using Substance Painter for this project, also had the same problem. And he solved it exactly the same way, by multiplying roughness by 1,5-1,6. For metals, additionally to this I also had to keep roughness not lower then 3,5.
Otherwise it would start sparkling like camera's flash. I found that it works best in 3.5-4,5 range.


Later on we also decided to darken the skin. Great advantage of Substance Painter is that everything consists of layers and groups, nothing can be merged, and therefore can be adjusted any time. This screenshot is made in UE4 but in different lighting conditions, in our scene darker skin looked better. Reason for using this default UE4 scene was that we had some trouble with lighting for a while in our scene, so I tested if textures work in this one, and after imported them to our level.